DE

Solo developer

Dull Edge Technologies

Documentation

PCB Automation

Home

A document for PCB Automation.

PCB Automation

Goal

The goal of this project is to be able to automatically create a 100mm x 100mm PCB. This does not currently include assembly. The current target board is a 30mm x 30mm 2 layer 8 x 8 Neo-Pixel display, the design requires sub millimeter trace with width and 0.75mm vias. The next goal after this to do a 4 layer board, the exact target board has yet to be identified.

Current Status

  • A V0.1 of an exposure tool has been made. Initially experiments with photoresist, developing, and etching have begun.
  • The broad software architecture has been defined. See sub document for details.
  • Testing of exposure, development and etching processes are under way.

Overview

To create a PCB there are two main ways, and a third upcoming method. The two primary methods are etching and milling. Etching using a photosensitive material a controllable UV light source and acids to remove unwanted copper; Milling uses a drill bit to cut away unwanted copper. The third upcoming method is to print conductive ink in the wanted pattern.

I've chosen to initially pursue etching due to its advantages in parallel manufacturing, similarity to semiconductor processes, and theoretical ability to hit very fine trace widths.

The overall project has three main domains:

  • Software
    • How is everything controlled
  • Tools
    • How is a process step completed
  • Process
    • What should happen

Plan

To reach the lofty goal of pushing a button and getting a pcb back some time later with out human intervention. The broad idea is to identify, create, test. Only stage 1 and stage 2 are fully fleshed out. Stages 3 and 4 goals and requirements are going to be informed by the results of stage 1 and 2.

Stage 1:

Goal: Identify and test MVP of the needed tools to effectively create a PCB with the target tolerances.

  • Create a basic exposure tool using a modified DLP projector.
  • Establish resolution limit without any optical modifications.
  • Identify useable exposure and etch times.
  • Find issues issues with using selected etchant and photoresist

Stage 2:

Goal: Create a basic motion stage, with <1mm accuracy and repeatability. And have the ability to register the location of the substrate.

  • Select a motion architecture.
  • Create a basic motion structure.
  • Add either a physical way to ensure the article is in the same location or add sensors to do so.

Stage 3:

Goal: Automatic via drilling.

Stage 4:

Goal: Automatic etching and development